Guest blog: More water storage needed for a sustainable future
Global declines in water storage are increasingly troubling. With greater hydrological variability due to climate change, more storage will be vital to provide the same level of security of water, food, and energy. Water storage is fundamental protection from the impacts of a changing climate, safeguarding the supply of water, and the water–food–energy nexus, even during extended drought.
For thousands of years, dams have stored water to irrigate crops, control flooding, and more recently to supply water for industrial and household use, and generate hydroelectric power – contributing enormously to food security, human development, and economic growth.
These days, many dams serve more than one function but remain the primary mechanism for coping with the variability of water supply and demand. During the last century, more than 45,000 dams higher than 15 m have been constructed worldwide, creating a combined storage capacity estimated to be between 6,700 and 8,000 km3, representing 17 percent of global annual runoff.
Security of water, food, and energy are inextricably linked. For example, approximately 50 percent of all large dams worldwide are used for irrigation. Without sufficient water storage, irrigated agriculture (the largest user of water at the global level, contributing 40 percent of the world’s food) is at the mercy of changing patterns of rainfall and runoff.
Understanding water storage issues is essential for successfully managing water resources. At the simplest level, it is a matter of ‘inflow (water supply) less outflow (water demand) equals the change in storage’. But it is particularly important to understand whether storage declines relate to reducing supply, increasing demand, or both. The answer is both and more.
Key factors influencing storage are greater variability of inflows due to climate change, increased demand due to population growth, reduced net storage due to sedimentation, and less dam construction occurring worldwide due to environmental and social impacts.
The effects of climate change are predicted to increase and to result in greater magnitude and frequency of hydrological extremes, such as prolonged droughts and significant floods. With the prolonged drought, inflows to storages will reduce. If demand remains the same, stress on existing water storage will increase.
In a 2015 report, the Climate Council of Australia stated that Australia is the driest inhabited continent on Earth, with some of the world’s most variable rainfall and stream-flow. The country has been deeply affected by drought throughout its history, with the most recent being the ‘Big Dry’ of 1996–2010 (also called the Millennium Drought) which went down in history as one of the worst droughts on record for Australia, with devastating impacts.
This prolonged drought ended in some areas of Australia with major flooding. In the state of Queensland, flooding began in December 2010 and continued into 2011 with at least 90 towns and over 200,000 people affected. The final damage was estimated to be USD 2.38 billion.
Storage can help protect communities from the impacts of these extreme events.
It is estimated that in 2017 Earth supports around 7.5 billion people, yet 200 years ago the number was less than 1 billion. Population and water demand are strongly linked. With our world population increasing at around 80 million people per year, rising demands for basic services and growing desires for higher living standards will intensify the demand for water and put additional strain on existing storage.
Many of the larger reservoirs worldwide have had their lifespans reduced significantly due to deposits of sediment within the storages, diminishing net storage in many regions of the world.
A number of these reservoirs were designed for 50-65 years of functionality until sediments would reduce their operational capacity. Although in these cases the reduction in storage was expected, it still results in a reduction in total storage, and therefore requires a response.
Globally, the annual rates of loss relative to installed storage capacity are generally estimated to range between 0.5 and 1.0 percent, equating to a total worldwide loss of storage of around 40 to 80 km3 per year.
Reduced dam construction
Installation of large reservoirs peaked during the 1960s and 1970s, both in number and storage volume. However, some of these larger reservoirs caused significant environmental and social damage, bringing dam construction under great scrutiny and ultimately decreasing dam construction worldwide.
With less dam construction, some decommissioning of older dams, and loss of storage due to sedimentation, net storage worldwide is falling, most dramatically in storage per capita. Such reduction in storage is likely to undermine the reliability of supply.
Few kinds of development projects arouse as much controversy as dams. However, large dams vary considerably in their environmental and social impacts. The severity of environmental impact is largely determined by the dam site. While dams at good sites can be very defensible from an environmental standpoint, those proposed at bad sites will be inherently problematic even if all feasible mitigation measures are properly implemented. The challenge is to find good dam sites to enable these necessary water storage to be developed.
It is important to note that the 2000 World Commission on Dams Report marked a new focus on sustainability in the development of dam engineering projects, requiring the participation of affected communities in the project planning phase.
How can we take action?
Good site selection is the most effective environmental mitigation measure.”
The following actions form a useful response to reduced worldwide storage and the pressing need to increase water storage to maintain reliable water supply, irrigation, and energy systems in a changing climate:
- Prioritise managing existing storages well, and recognise the importance of storages for maintaining reliable supply. Appropriately manage sedimentation and its impact. Employ near-real-time management of water based on improved information systems to ensure the best economic use of existing reservoirs
- Explore opportunities to increase the storage capacity of existing reservoirs by raising dams. Often, this can be more cost-effective and have lower environmental impacts than a new dam project. It may also be possible to improve the use of existing storages by providing greater interconnection between storages. Greater interconnection between storages can enable greater flexibility in managing inflow variability across a region.
- Identify dam sites, either on-stream or off-stream, which will minimise environmental and social impacts. Good site selection is the most effective environmental mitigation measure.
The net decline in global reservoir storage demands a different mindset for analyzing the economics and construction of sustainable dam projects. Rather than debating whether more dams are required, decision-makers must accept that more storage will be needed and should plan accordingly.